FAQ : IDEAL Administration

Vereinfachte Verwaltung von Windows Active Directory-Domänen und Arbeitsgruppen über eine einzige Konsole

Suche Hilfe  


By using this search engine, you can search one or more terms in the complete Pointdev FAQ.

  • In order to look for one or more keywords, type them in the search field using space to separate them.

    ex : remote control

    This search will show you every FAQ containing the word "remote" OR "control".

  • In order to look for a full sentence, use the quotes " " around your keywords
  • ex : "remote control"

    This search will show you every FAQ containing the whole word "remote control".

 Titel und Inhalt
 Nur titel

Windows Active Directory Domain Management

How to wake up remote computers with the "Wake On Lan" (WOL) function?

I've read that your administration tools, IDEAL Administration and IDEAL Remote,  have Wake On Lan functions for remote wakeup of client computers.

Can you tell me more about this feature?

Try IDEAL Administration free for 30 days!
Optimize and simplify WOL management with IDEAL Administration (installed in 2 minutes)

Wake on Lan is a hardware / software solution that allows a computer to be remotely woken. A computer that has a network connection and is ACPI (Advanced Configuration Power Interface) compatible can be remotely enabled.

As a reminder, the Wake On LAN function enables remote stations to be woken up by sending a "Magic" packet over the network. For this packet to be correctly formed, you need to indicate the MAC address of the network card on the remote computer, along with its broadcast address.

In a first, Wake on Lan must be enabled in the BIOS of the computer, and then configured in the operating system.

To enable Wake on Lan in the BIOS (below for Intel motherboards):

  1. Press F2 during boot to enter the BIOS setup.
  2. Access the power menu.
  3. Set Wake-on-LAN to turn on the power.
  4. Press F10 to save and exit the BIOS setup.

To configure Wake On Lan in Windows 8, Windows 7, Windows 10:

Press Windows key + X to bring up the hidden quick access menu:

  1. Select Device Manager.
  2. Expand the Network Adapters section.
  3. Right-click the adapter that you are currently using, and then click Properties.
  4. Click on the advanced tab.
  5. Select Wake on Magic package from the list of properties.
  6. Expand the value section and select enabled.
  7. Click Power Management tab.
  8. Select the Allow this device to wake the computer check box.
  9. Click OK.

To configure Wake On Lan in Windows XP:

  1. Click Start> Settings> Control Panel.
  2. Double-click system.
  3. Click the Hardware tab, and then click Device Manager.
  4. Expand the Network Adapters section.
  5. Right-click your adapter and select Properties.
  6. Click on the Advanced tab.
  7. Select Wake-on-LAN Options and click Properties. Define the following elements:
    1. Enable PME: set to enabled
    2. Wake on Settings: Set to wake up on Magic Packet

IMPORTANT: The computer must be in either Sleep or Hibernation mode for this to work.

Once these prerequisites have been verified, we can use the Wake On Lan function from our software.

First, download the free 30 day version of our software if you have not installed it yet: Download IDEAL Administration.

Once installed, just execute it under a domain admin account.

  • "Wake On LAN" function via the graphic interface

Select Computers menu and Wake (Wake On Lan)

IDEAL Administration & IDEAL Remote provide simple management of Wake On LAN.

You can retrieve automatically all MAC and broadcast addresses for a group of computers or a range of IP addresses (Action menu then Automatic addition).

Or manually add a Wake on LAN configuration (Action menu, then  Manual addition).

You can also configure the port to use for sending the packet (default port is 9) or even load a list of computers from a csv file exported from the Windows WINS server.

To send the wake-up packet to one or more computers on your network, check them from the list, then click the Action button then Wake up.

You can also schedule and automate the use of Wake On LAN: check the target computers from the list , then click the Action button then Schedule.

You will then be prompted to create a scheduled task.

You can save or open a selection of computers from buttons provided for this purpose.

  • "Wake On LAN" function via Command line

IDEAL Administration & IDEAL Remote let you run the Wake On LAN function from the command line.

Command format:

IA.exe WOL /mac:00-11-22-33-44-55 /ip:ip_address /port:port_number (default port is 9) /file:"file.wol"

/mac: MAC address (required)
/ip: broadcast address (optional; if omitted, the default broadcast address is used)
/port: port used for sending the packet (optional; if omitted, default port 9 is used)
/file: file .wol containing the list of computers to wake. The wake-up packet is sent to all the computers listed in the file. Optional feature.

Betrifft auch folgende Software: IDEAL Remote
Letzte Änderung: 24/11/2021


Zurück zur Liste


FAQ : IDEAL Administration | IDEAL Dispatch | IDEAL Remote | IDEAL Migration

IDEAL Administration 23.5
Zurück zum Anfang